NOTE: This will be snug and may require you to separate the barrel band by pulling out on the sides or squeezing the top and bottom while working it into place. EVOLVE 3D, LLC is not liable for damage to your property or person while using this product. DISCLAIMER: The purchase includes only the 3D-printed parts. Do not over-torque! Secure barrel band assembly, using m3 screw, by hand tightening until snug. WARRANTY: We offer a limited lifetime warranty on our 3D-printed parts. 1. 4. Slide barrel band assembly over shroud and tube/bottle. Confirm air gun is unloaded and safe before beginning installation. Be careful not to peel up the silicone friction pads while you are sliding it into place. Both materials are well suited for this application and print with a really nice low gloss finish. WARNING! MATERIAL: 3D printed from HIPS or ASA filament. USE this product at your own risk. 3. All other objects in the photos are for reference only. INSTALLATION: Purchase includes 3D printed barrel band assembly and M3 Mounting Hardware. Remove the threaded foster fill cap from the end of the tube (not required for bottle models). Remove any barrel accessories from the end of the shroud (moderators, thread protector, etc) 2.
Accessories
Evolve3D Air Venturi Avenge-X Barrel Band, Grey
Specifications of Evolve3D Air Venturi Avenge-X Barrel Band, Grey | |
---|---|
Category | Sporting Goods > Outdoor Recreation > Hunting & Shooting > Paintball & Airsoft > Airsoft |
Instock | instock |
Last Updated