Black Arts AEA Challenger Standard Big Bore .50 Barrel Band

Material Carbon Fiber filled PETG PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. Bolstered ridge along circumference of Barrel Band increases flexural modulus (stiffness) and aesthetic appeal. The cap head screw is secured using a captive nut for a clean appearance. These bushings give way just enough to permit an easy install while still providing a tight fit, and provide some dampening characteristics. In order to provide a tight fit and provide an easy install, we built in 2 large channels to accept TPU (a rubberized plastic) bushings. Features Robust design built for strength and stiffness. These bushings act as dampeners as well as aiding in installation without compromising a tight fit to the barrel. The Black Arts Design AEA Challenger Standard Big Bore .50 Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop instigated by the use of large moderators. Once snugged down the single M3 screw provides ample holding force to secure the barrel while eliminating barrel droop regardless of the moderator selected. TPU - A rubberized plastic with dampening characteristics. 2 internal TPU (rubberized plastic) bushings are built into the barrel section. The addition of carbon fiber increases flexural modulus (stiffness) well above standard PETG and further increases dimensional accuracy.

Accessories

Black Arts AEA Challenger Standard Big Bore .50 Barrel Band